Madera reciclada o de desecho

Careful selection of old, reclaimed timber Dismantling and professional preparation for the international sale Marks of machining and wear as well as natural weathering create unique, original surfaces Traces of old world craftsmanship and elaborate woodworking methods and use are stored There is an interesting niche market for unique old wood. Unique wood with history and character is prepared and run for a second use High-quality, ecologically valuable, lasting value and sustainable Mostly processed manually, sorted and packaged Also supply of raw materials, semi-finished products to finished, ready to lay products and tailor-made solutions

Egger Romania invested in resource saving technology and included recycling in the process. Up to 18% of the wood used in Romanian factories are recycling material. They process waste wood from furniture, pallets, wooden packaging materials, construction and demolition, that meets the requirements of the applicable directives and inspection systems. The material is also inspected visually and contaminated wood is separated for thermal use. In Romania, the EGGER Group runs its own recycling enterprises under the name Timberpak.

Suitable recycled wood is processed there and used for chipboard production. Large volumes of by-products and recyclable wood are generated by the plants. The company upgrades them into materials or uses them to generate environmentally friendly heat and electricity. With EGGER wood-based materials, the company established good environmental performance of the urban wood material. The objective of a closed loop material cycle is, on the one hand, to reuse all waste and by products as efficiently as possible, and on the other hand, to make substances used in the product available again for production at the end of the product life cycle, by implementing optimal recycling. The possibility of a closed material cycle should be taken into account even during the preliminary stage of product planning in conjunction with product design. Re-use of materials that were already used in products and have passed through a usage phase. The great challenge is to separate materials so that they become again source materials for new products. The collection division of recycled wood and the recycling installation of wood from Romania are the EGGER’s solution for a secondary, sustainable life cycle of materials based on wood.

The recycling wood quantities which were elaborated and recycled in 2016 by EGGER Romania replaced the potential of usage of 35,000 hectares of forests. The company has a unique wood recycling installation in Romania, dedicated and used exclusively for this purpose. At Romanian level, EGGER uses in average 17 % recycled wood for the production of panels based on wood in 2018. Last year, EGGER Romania reached a level of approximately 8 % and in the half of 2017, while in 2017 reach 15 % of recycled wood, and it was estimated a share of 17 % for the second half of 2017. The objective for 2020 is to recycle more than 150,000 tonnes of materials based on wood, annually, equivalent to more than 30 % of the volume of wood from forest works, according to Ioan Banciu, technical director of EGGER Eastern Europe division.

The operation reduces the amount of discarded wood, which is otherwise deposited at landfills or burned. A new service life is given to old wood and its lifetime is extended, which directly influence the prolongation of CO2 storage. The key sources of old wood will are defined, technological solutions for the use of such wood was developed and procedures for the production of windows were developed in cooperation with R&D institutions with an emphasis on the analysis of contaminated wood, physical properties of wood and the appropriate surface treatment of such products.

M Sora has developed a prototype of a timber window ReWin made of disposed timber. ReWin window is a unique example of a product that was developed by recycling the disposed timber that would otherwise end up at landfill, and represents a completely fresh idea and innovation in the field of builders’ joinery.

TEGA operates in urban public services area and initiated large campaign for wood residue collection in cities/villages in Covasna County. TEGA uses wood chips as fuel in its heating plant and provide heating for its workshops, offices. The capacity of the heat boiler is 200 kWt.
The idea was to collect wood residues from green areas. Collected wood residues are chopped and crushed and can be delivered for energy production. Types of collected waste wood: i.e. forest sanitation, gardening cuttings and cleaning operations. The types of biomass used are wood residues (barks, chips, branches).

Energy problems are so acute, that it is no longer possible to satisfy the local’s constantly growing needs. This growth of energy demand must be increasingly satisfied by diversified energy sources, including sustainable and renewable resources. Biomass is a renewable energy option that can be practical and safe, can strengthen the circular economy, and can help ease the urgent strain on our planet’s ecosystem.

TEGA company promotes and invests in acceleration of the entire biomass chain. The company members participate in collection, chipping activities and produce more than 500 m3 woodchips. They use this biomass material and valorize at the company. Moreover, training sessions on bioenergy issues, active involvement in local projects such as at waste collection actions TEGA company was actively involved.